CHEMITOOL Vinyl Chemical Resin (M12 X 110)
search
  • CHEMITOOL Vinyl Chemical Resin (M12 X 110)

CHEMITOOL Vinyl Chemical Resin (M12 X 110)

3,840000 €
Tasse incluse

- High performance, non-styrene vinylester based injection resin. It works in dry and wet holes.

- Recommended for use in concrete, stone, solid bricks and in a wide variety of applications.

- It is also suitable for structural applications, with reinforcement bars in new construction or restoration works, and fastening bushings for prefabricated concrete elements.

Quantità

  Security policy

Security policy (edit with the Customer Reassurance module)

  Delivery policy

Delivery policy (edit with the Customer Reassurance module)

  Return policy

Return policy (edit with the Customer Reassurance module)

- Advantages:

- Quick hardening;

- High mechanical resistance;

- Possible use at low temperatures.

- Indications: -Ampoules can be used, as long as they are intact and the resin is liquid (viscous) at room temperature.

- Installation in a wet hole doubles the hardening time.

- Applications:

- Applicable on solid supports. It does not create stress on the base material and can, therefore, be applied close to the edges.

- Instructions: 1º – Make the diameter of the hole; 2º– Clean the hole carefully with a brush or an air pump. It is not recommended to clean it with water; 3º – Insert the capsule into the hole. Make sure that the liquid inside the bulb runs when you move the bulb by hand; 4º – Install the rod into the hole using an impact drill; 5º – Observe hardening and gel times required before applying charges; 6º – Assemble the material to be fixed and tighten the nut to the correct torque.

CH09120110

Riferimenti Specifici

ean13
5601866276728
Commenti (0)
Ancora nessuna recensione da parte degli utenti.