CHEMITOOL Vinyl Chemical Resin (M12 X 110)

- Advantages:

- Quick hardening;

- High mechanical resistance;

- Possible use at low temperatures.

- Indications: -Ampoules can be used, as long as they are intact and the resin is liquid (viscous) at room temperature.

- Installation in a wet hole doubles the hardening time.

- Applications:

- Applicable on solid supports. It does not create stress on the base material and can, therefore, be applied close to the edges.

- Instructions: 1º – Make the diameter of the hole; 2º– Clean the hole carefully with a brush or an air pump. It is not recommended to clean it with water; 3º – Insert the capsule into the hole. Make sure that the liquid inside the bulb runs when you move the bulb by hand; 4º – Install the rod into the hole using an impact drill; 5º – Observe hardening and gel times required before applying charges; 6º – Assemble the material to be fixed and tighten the nut to the correct torque.