CHEMITOOL M12X110 Chemical Anchor Capsule Chemires

- Advantages:
- Quick hardening;
- High mechanical resistance;
- Possible use at low temperatures.

- Indications:
-Ampoules can be used, as long as they are intact and the resin is liquid (viscous) at room temperature.
- Installation in a wet hole doubles the hardening time.

- Applications:
- Applicable on solid supports. It does not create stress on the base material and can, therefore, be applied close to the edges.

- Instructions:
1º – Make the diameter of the hole;
2º– Clean the hole carefully with a brush or an air pump. It is not recommended to clean it with water;
3º – Insert the capsule into the hole. Make sure that the liquid inside the bulb runs when you move the bulb by hand;
4º – Install the rod into the hole using an impact drill;
5º – Observe hardening and gel times required before applying charges;
6º – Assemble the material to be fixed and tighten the nut to the correct torque.