CHEMITOOL Transparent Cyandacrylic Activator
search
  • CHEMITOOL Transparent Cyandacrylic Activator

CHEMITOOL Transparent Cyandacrylic Activator

€ 17,220000
Inclusief belasting

- Activator formulated on a solvent basis to increase the curing rate of the cyanoacrylates.

- Especially suited to combine with slower, dense references and porous substrates where the adhesive does not cure until it has penetrated the substrate.

- It can also be used for cyanoacrylate to heal off the joint.

Aantal

  Security policy

Security policy (edit with the Customer Reassurance module)

  Delivery policy

Delivery policy (edit with the Customer Reassurance module)

  Return policy

Return policy (edit with the Customer Reassurance module)

- Advantages:

- Easy application.

- Glueing almost any kind of material;

- Extremely resistant joints.

- Indications:

- Never mix the accelerator liquid with the cyanoacrylate adhesive, since an exothermic reaction may occur.

- We recommend testing the surfaces to see compatibility.

- Applications:

- Suitable for preparing the surface for subsequent adhesion. Suitable to speed up the hardening process of cyanoacrylate glue.

- Instructions:

- The surfaces must be clean, dry and free of oil or fat. 1º – Apply on the area to be bonded and wait for evaporation (10-30 seconds).2º – Apply the cyanoacrylate on one of the surfaces, joining the two parts making a light pressure until you notice the glue has adhered.

- If after one minute (approximately) the parts do not hold together, you can apply the accelerator again. The hardening rate depends on the materials and the cyan resistance used.

CH11010000

Specifieke referenties

ean13
5608907432631
Commentaar (0)
Geen klantenbeoordelingen op het moment.