CHEMITOOL Cyanoacrylate Adhesive Activator Chemiglu

- Advantages:
- Easy application.
- Glueing almost any kind of material;
- Extremely resistant joints.

- Indications:
- Never mix the accelerator liquid with the cyanoacrylate adhesive, since an exothermic reaction may occur.
- We recommend testing the surfaces to see compatibility.

- Applications:
- Suitable for preparing the surface for subsequent adhesion. Suitable to speed up the hardening process of cyanoacrylate glue.

- Instructions:
- The surfaces must be clean, dry and free of oil or fat.
1º – Apply on the area to be bonded and wait for evaporation (10-30 seconds).2º – Apply the cyanoacrylate on one of the surfaces, joining the two parts making a light pressure until you notice the glue has adhered.
- If after one minute (approximately) the parts do not hold together, you can apply the accelerator again. The hardening rate depends on the materials and the cyan resistance used.