PFERD Cleaning Kit 7 ZG

Advantages:
- Good spray qualities.
- Good lubrication qualities.
- Low viscosity.
- Protects against corrosion.
- Highly water-resistant.

(3) Gear grease FT 3
For gears on flexible shaft machines, angle drives and angle handpieces.

(4) Ball bearing grease FT 5
For all ball bearings. Light moistening of grease slingers to protect them against dust.

(5) Flexible shaft grease FT 4
Grease with special lubrication and adhesive properties for flexible shafts 4 ZG to 15 KG.
After approximately 100 operating hours, the core of the flexible shaft must be re-lubricated. Degrease the core and casing and reapply the special shaft grease to the core.

(6) Maintenance set consists of:
1 hose brush for removing the old grease from the flexible casing.
2 non-linting cleaning cloths (400 x 330 mm)
Degrease the core with a degreasing agent and a cleaning cloth (do not use cotton waste!). Apply new grease onto a second cloth andpull the core through.