INDICATIONSThe surface should be clean, dry and degreased. Remove old and loose varnish and rust, sand the surface. For the best metallic effect, apply a layer of white primer. On plastic surfaces, apply a layer of plastic primer before applying the white primer. After drying, sand the base coat (grain 600). The spray must be at room temperature, between 15°C and 25°C. The distance to the surface to be treated should be 25 to 30 cm.
APPLICATIONS Recommended for wood, metal, glass, stone and different types of plastic.
INSTRUCTIONS Apply in several thin layers. Before applying the next coat, shake the spray can again.The metallic effect is reinforced when using a first coat of CHEMISOL Wheel Spray and when applying an acrylic varnish finish coat.After use, clean the valve (turn the can upside down and press the nozzle for approximately 5 seconds until only gas comes out). Drying time depends on room temperature, air humidity and thickness of product applied.
CHC060602
Data sheet
Ref
CHC060602
EAN
5604630051941
Brand
CHEMITOOL CHEMICALS
Color
RED
Resistance to temperature
< 110°C
Capacity
400 ML
Coverage
1,25 A 1,75 M2
Base
NITROCELULOSE
Nitrocellulose
Drying time
> 5 - 10 MIN
Shelf life
10 ANOS
10 years
Solid content
? 16% W/W
EU-VOC solvent percentage
? 84% W/W
Touch Drying
APÓS 10 A 20 MINUTOS
Touch
> 10 - 20 min
Hardening
> 2 H
Drying
DEPOIS DE 5 A 10 MINUTOS
Solids
APROX. 16% W/W
Specific References
EAN13
5604630051941
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Your review cannot be sent
CHEMISOL Metallic Paint is a high-quality and quick-drying spray paint, with metallic effect.