CHEMITOOL Blue Metallic Paint Chemisol

INDICATIONSThe surface should be clean, dry and degreased. Remove old and loose varnish and rust, sand the surface. For the best metallic effect, apply a layer of white primer. On plastic surfaces, apply a layer of plastic primer before applying the white primer. After drying, sand the base coat (grain 600). The spray must be at room temperature, between 15°C and 25°C. The distance to the surface to be treated should be 25 to 30 cm.

APPLICATIONS
Recommended for wood, metal, glass, stone and different types of plastic.

INSTRUCTIONS
Apply in several thin layers. Before applying the next coat, shake the spray can again.The metallic effect is reinforced when using a first coat of CHEMISOL Wheel Spray and when applying an acrylic varnish finish coat.After use, clean the valve (turn the can upside down and press the nozzle for approximately 5 seconds until only gas comes out).
Drying time depends on room temperature, air humidity and thickness of product applied.