CHEMIMOUNT Assembly Adhesive is a styrene-butadiene rubber (SBR) based adhesive that hardening by evaporation of solvents becoming a powerful, flexible and moisture resistant bond.
ADVANTAGES: Ultra-fast setting; great bonding power; outdoor and indoor use; quick-drying; filling of cracks; toluene free.
Security policy
Security policy (edit with the Customer Reassurance module)
Delivery policy
Delivery policy (edit with the Customer Reassurance module)
Return policy
Return policy (edit with the Customer Reassurance module)
INDICATIONS Not recommended in permanently submerged applications unless you use a primer and perform previous tests. Do not apply on PE, PP, Teflon®, bituminous surfaces and polystyrene.
APPLICATIONS Suitable for combining different materials such as panels, panelling, skirting boards, wooden frames, carpets, tiles, ceramic pieces, mirrors, plastics, rigid PVC, cork, metals, brick, cement, concrete and rigid insulators, sills, door stops, skirting boards, trim, profiles and panels. For glue wood and PVC agglomerates on masonry, stone or concrete.
INSTRUCTIONSApply the product evenly on points or strands with a separation of 20 cm. When applying the materials to be bonded, place the pieceto the contact surface. Separate the piece and wait for 5 minutes, up to a maximum of 30 minutes, to achieve fast evaporation of the solvents. Then place the item again, applying pressure on the entire surface.
CH05010000
Data sheet
Ref
CH05010000
EAN
5608907241882
Brand
CHEMITOOL CHEMICALS
Resistance to temperature
-15°C A +70°C
Density
1,50 G/ML
Capacity
300 ML
Application temperature
+15°C A + 30°C
Base
BUTADIENO ESTIRENO (SBS)
Cartridge
300 ML
Shelf life
15 MESES
Solids
83% (2H/130OC %)
Cold resistance
ATÉ -15°C DURANTE TRANSPORTE
Opening temperature
3-5 MIN (A 23°C E 55% HR)
Specific References
EAN13
5608907241882
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Your review cannot be sent
CHEMIMOUNT Assembly Adhesive is a styrene-butadiene rubber (SBR) based adhesive that hardening by evaporation of solvents becoming a powerful, flexible and moisture resistant bond.
ADVANTAGES: Ultra-fast setting; great bonding power; outdoor and indoor use; quick-drying; filling of cracks; toluene free.