CHEMISOL Carburettor Cleaner Spray is a high-quality product, suitable for the interior and exterior of carburettors and valves, without the need for disassembly.
Security policy
Security policy (edit with the Customer Reassurance module)
Delivery policy
Delivery policy (edit with the Customer Reassurance module)
Return policy
Return policy (edit with the Customer Reassurance module)
- Direct spraying; - High dissolving properties; - Leaves no residue; - Non-corrosive;
INDICATIONS
The surface must be clean, dry and degreased. Sand the surface. The spray must be at room temperature. The best temperature of use should be from 5°C to 30°C.Before use, shake the spray can for 2 minutes and spray a sample. The distance to the surface to be treated should be approximately25 to 30 cm.
APPLICATIONS
Recommended for interior and exterior cleaning of carburettors and valves.
INSTRUCTIONS
Before use, shake the spray can.
1º Stop the engine and let it cool down. Remove the air filter.
2º Spray the outside surface of the carburettor until the dirt has disappeared.
3º Spray the visible parts from the inside of the carburettor.
4º Start the engine at a very limited speed.
5º Spray the CHEMISOL Carburettor Cleaner Spray several times on the air inlet and increase the engine speed.
6º Switch off the engine and install the air filter.
CHC020201
Data sheet
Ref
CHC020201
EAN
5604630050081
Brand
CHEMITOOL CHEMICALS
Color
TRANSPARENT
Odor
CARACTERÍSTICO
Characteristic of solvent
Flash point
< 21°C
Density at 20°C
0,84g/ml
Capacity
12
Quantity
400 ML
Steam pressure at 20ºC
3 A 4 BAR
Base
HIDROCARBONETOS
Hydrocarbons
Yield
3,0 G/S
Shelf life
10 ANOS
10 years
EU-VOC solvent percentage
100% W/W
Touch Drying
APÓS 10 A 20 MINUTOS
Touch
Após 10 a 20 min
Specific References
EAN13
5604630050081
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Your review cannot be sent
CHEMISOL Carburettor Cleaner Spray is a high-quality product, suitable for the interior and exterior of carburettors and valves, without the need for disassembly.